Products

PULLEY IDLER FLAT 3/4"X 6" FIP6000-0.75 COMPOSITE

Item #10157

Contained in Composite Flat Idler Pulley Assortment Rotary Item Number 10125

PULLEY IDLER V 0.64 X 5" COMPOSITE VIP5000-5.403

Item #10158

Composite V Idler Pulley.

PULLEY IDLER V 0.93 X 6" COMPOSITE VIP6000-6.403

Item #10159

Composite V Idler Pulley

MTD BLADE 20" X 3/8" REPLACES MTD 742-01

DISC DRIVE W/LINING SNAPPER

Item #10169

Disc with liner replaces Snapper 53103. Contains Rotary 300 Disc and 345 Liner.

MTD BLADE 21" X 3/8"(D) *DISCONTINUED*

SPINDLE HOUSING

MTD BLADE 22" X 3/8" REPLACES MTD 742-01

Grasshopper Part #101818

Name: Fuel Draw Tube
Type: OEM Fuel System Component

Description & Function

• This part is a fuel draw tube used inside the fuel tank or tank assembly on select Grasshopper mowers.

• Its purpose is to draw fuel from the tank and deliver it to the fuel pump or fuel line.

• A proper draw tube is critical for consistent fuel flow—damage, blockage, or deterioration can cause hard-starting, loss of power, or complete fuel starvation.

We can confirm this fits your mower when you call with your MODEL NUMBER and SERIAL NUMBER.

NON RETURNABLE - SO PLEASE CALL BEFORE ORDERING! 765-529-6807 ASK FOR PARTS

Compatibility / Fit Notes

• Commonly used in certain front-mount Grasshopper tractors, including older 700-series units.

• Placement and length vary by model; always verify the mower’s year, tank style, and engine type before selecting the tube.

• Appears in fuel-tank assemblies where an internal pickup tube is required rather than a bottom-feed tank design.

Key Features

• OEM-specified tubing ensures correct inside/outside diameter and proper length for fuel pickup.

• Resistant to gasoline, diesel, and blended fuels depending on the mower’s engine type.

• Designed to hold shape and resist collapse under suction from the fuel pump.

Service / Sales Notes

• Replace if the mower experiences intermittent fuel starvation, debris blockage, or if the original tube has hardened, cracked, or fallen off its fitting.

Grasshopper Part #101819

Name: Fuel Draw Tube
Type: OEM Fuel System Tube

Description & Function

• This component is a fuel draw tube used in the fuel system of certain Grasshopper mower models.

• Its purpose is to draw fuel from the tank and deliver it to the fuel pump or fuel system inlet.

• If the tube is damaged, clogged, or missing, the engine may suffer fuel starvation, loss of power, or hard-starting.

We can confirm this fits your mower when you call with your MODEL NUMBER and SERIAL NUMBER.

NON RETURNABLE - SO PLEASE CALL BEFORE ORDERING! 765-529-6807 ASK FOR PARTS

Compatibility / Fit Notes

• Fits a variety of Grasshopper front-mount and tractor-style models where an internal tube is required for fuel pickup.

• Always verify the machine model, tank configuration, and engine type to ensure correct part application.

Key Features

• OEM-specified tubing ensures correct length, diameter, and end fitting for Grasshopper machines.

• Built from fuel-resistant material able to withstand vibration, heat, and the routing conditions typical of mowing equipment.

• Low-cost but critical service item for fuel delivery reliability.

Grasshopper Part #101820

Name: Fuel Draw Tube
Type: OEM Fuel Pickup Tube

Description & Function

• This is a fuel draw (pickup) tube used inside the fuel tank on select Grasshopper mower models.

• Its job is to pull fuel from the correct point in the tank and feed it to the fuel pump or fuel line.

• A properly functioning draw tube prevents fuel starvation, especially when the tank is low or the mower is operating on slopes.

Compatibility / Fit Notes

• Known to be used on certain older Grasshopper front-mount tractors, including mid-1980s models such as the 1822 series.

• Tube length, routing, and mounting style vary depending on the mower’s year and tank design.

• Always verify the machine’s model, year, and tank assembly before selecting this tube since multiple draw-tube part numbers exist (e.g., 101818, 101819, 101820).

Key Features

• OEM-spec tubing with correct inside diameter, outside diameter, and length for Grasshopper fuel tanks.

• Fuel-resistant material designed to withstand vibration, temperature changes, and long-term fuel exposure.

• Maintains structural integrity so it won’t collapse under suction from the fuel pump.

Service / Sales Notes

• Replace if the tube is cracked, hardened, split, or no longer reaching the intended pickup point in the tank.

We can confirm this fits your mower when you call with your MODEL NUMBER and SERIAL NUMBER.

NON RETURNABLE - SO PLEASE CALL BEFORE ORDERING! 765-529-6807 ASK FOR PARTS

FILTER AIR FOAM 5-1/2"X 3" LAWN-BOY

Item #10183

Lawnboy 95-5574 Foam Air Filter. Fits Late Model 2-Cycle Lawnboy Mowers.

Grasshopper Part #101836

Name: Fuel Tube
Type: OEM Fuel System Line

Description & Function

• This is a fuel tube used in the fuel-delivery system of select Grasshopper mower models.

• It carries fuel between components such as the tank, fuel pump, shutoff valve, or filter.

• A properly functioning fuel tube is essential to prevent fuel starvation, vapor lock, leaks, or collapse under suction.

Compatibility / Fit Notes

• Known to appear in assemblies for certain 700-series Grasshopper tractors, including mid-2000s models such as the 727K2 series.

• The exact routing, diameter, and length can vary depending on the machine’s fuel-tank design and engine type—always verify model and year.

• This part number is one of several OEM fuel tubes used across Grasshopper’s lineup; replacing with OEM ensures the correct internal diameter and wall strength.

Key Features

• OEM-grade tubing formulated to resist gasoline, diesel, and ethanol blends used in Grasshopper equipment.

• Designed to withstand vibration, heat, and long-term exposure found in commercial mowing.

• Pre-cut to the correct length and formed for proper installation in the mower’s fuel system.

Service / Sales Notes

• Replace if the mower shows hard-starting, intermittent fuel flow, wet spots from seepage, or if the tube becomes brittle or soft.

We can confirm this fits your mower when you call with your MODEL NUMBER and SERIAL NUMBER.

NON RETURNABLE - SO PLEASE CALL BEFORE ORDERING! 765-529-6807 ASK FOR PARTS

FILTER AIR PANEL 8-3/4"X3-1/8" B&S

Item #10184

Air Filter replaces B&S 697014 and 697634. Fits AVS Models 284H07, 284H77, 285H07, 285H77, 286H770, 286HTT-0121, 31E700, 31E707, 31E777, 31F777, 31G700, 31G777, 31H777, and 31H700 series. Washable version is Rotary 12964. For Bulk Pack, See Rotary 12943

PULLEY DOUBLE ENGINE 1"X3-1/2" TOP X 5-1/2"BOTTOM MTD

Item #10185

Double Engine Pulley replaces MTD 756-0982B, 753-0635 and 756-0488. Fits Model 660-679 Riding Mowers.

Grasshopper Part #101875

Name: Bushing – Fuel Tube
Type: OEM Fuel System Bushing

Description & Function

• This bushing is used in the fuel system of certain Grasshopper mower models, specifically in the fuel‐tube assembly.

• Its function is to provide a secure, sealed mounting point or support for the fuel tube, preventing movement, abrasion, or leakage at the mounting location.

• A worn or missing bushing can lead to fuel‐tube vibration, chafing, or possible fuel leaks, which can compromise fuel delivery and safety.

Key Features

• OEM grasshopper part ensuring correct fit, material, and durability for the application.

• Designed to resist fuel exposure, vibration, and operational stresses typical of commercial mower use.

• Economical spare part but critical for maintaining the integrity of the fuel tube routing and mounting.

Compatibility / Fit Notes

• Commonly found in assembly listings for various Grasshopper models (specific model years may vary).

• Because fuel-tube assemblies differ by machine, always verify the machine’s model, build year, and tank/fuel system configuration before selecting this bushing.

• Some parts lists show this item under “Bushings – Fuel Tube” which indicates it supports the fuel-tube mounting, not the tube itself.

Service / Sales Notes for Clean Slate Power House

• Good stocking item due to its low cost and role in service jobs — a missing or broken fuel-tube bushing is often overlooked.

We can confirm this fits your mower when you call with your MODEL NUMBER and SERIAL NUMBER.

NON RETURNABLE - SO PLEASE CALL BEFORE ORDERING! 765-529-6807 ASK FOR PARTS

Grasshopper Part #101880

Name: Grommet
Type: Small rubber/plastic grommet used in equipment assemblies

Description & Function

• This grommet is a small component used to protect cables, tubes, or hoses where they pass through metal panels or other rigid surfaces.

• Helps prevent abrasion, wear, noise, or vibration where fittings or wiring pass through sheet metal or housings.

• Important for serviceability and longevity—missing grommets can lead to rub-throughs, wire damage, leaks, or failure of adjacent components.

Fit / Compatibility Notes

• Use in various assemblies on Grasshopper machines, such as reservoir and hose assemblies where a grommet supports or seals a hose/bushing interface. 

• Because grommets are often reused across many models, it may serve in multiple Grasshopper series and years; verifying the specific passing-point (hose, panel, wiring harness) is recommended to ensure correct size and ID.

Key Features

• OEM part with correct dimensions for the specific mounting or routing location in the mower assembly.

• Designed to resist common hazards in mower use: vibration, heat, oil/fuel exposure, and structural movement.

We can confirm this fits your mower when you call with your MODEL NUMBER and SERIAL NUMBER.

HOUSING JACKSHAFT ASSEMBLY MURRAY

Item #10189

Jackshaft Housing Assembly replaces Murray 1001200. Fits 2001 Models and up Riding Mowers. Includes Shaft with Grease Zerk.

BRAKE PUCK REPLACEMENT SET

Item #10191

Replacement Brake Puck Set. 1.3" Height, 1.6" Width, .350" Thickness. Sold only in pairs.

AYP BLADE 14-5/8" X 1-1/4" REPLACES AYP

FUEL FILTER WITH HOSE RYOBI

Item #10206

Ryobi 682039 Fuel Filter with 6" of 1/8" Fuel Line. Fits Ryobi, Lawnboy, Ryan and others.

BLADE 16-1/4" X 6 POINT STAR MTD

Item #1021

Requires (1) 1022 & (2) 1021 for 46" Cut MTD.

BLADE 14-13/16" X 6 POINT STAR MTD

Item #1022

46" Cut MTD. Requires (1) 1022 & (2) 1021.

PULLEY IDLER 11/16"X 5 1/2" HUSTLER

Item #10227

Idler Pulley replaces Hustler 781856. Fits 52", 60" & 72" Super Z Drive Units.

NUT FLANGED MTD

Item #10228

Blade Spindle Nut used on Rotary 9285, 9284, 9286, 9287, 9516, 9515, 9518, 9288 and 9517